Family Heirloom, Help with Identification?

Sam McGinley

Curious about Wooden Canoes
Hello all,

I work in the marine industry and have recently received a very special family heirloom that I want to preserve. The boat in the pictures was my great-great grandfather's personal boat. It has been used by my family in various capacities over the years, but for the last several it has hung on a wall at a marina or been stored in the rafters. We know it was made at the turn of the century, so the very late 1800s or early 1900s. I'd like to know more about it, begin the cleanup and restoration process, and see it used again. What should I look for to help with identification? The canvas was painted at some point, and the seats were redone. Thank you for looking and for any help you can offer!
Screen Shot 2019-10-10 at 8.57.11 AM.png
Screen Shot 2019-10-10 at 8.57.44 AM.png
 
Welcome and congratulations, the first thing to check is the bow deck for any sign of a decal or tag. The next would be a serial number and the information at https://www.wcha.org/forums/index.php?threads/791/ may help you find these. My first guess would be a Penn Yan Kingfisher Canoe as shown in their 1952 catalog below. Boats with a family connection are always extra special. Good luck,

Benson


page-39.jpg
 
Last edited:
Thanks, I follow that other posts advice on how to find the serial number. I'd hope to find one. I agree that two models look very similar, you might be on to something. Although, that wouldn't match the history I've been told about the boat. Fingers crossed for a solid serial number.
 
Family provenance sometimes gets distorted. I run into that quite often. I've gotten into the habit of writing things down as I go to leave records for anyone that might have a future interest... I've also gotten into the habit of writing a quick history on a piece of planking when I work on them. Many of the canoes I own or have worked on have been owned by one or two folks before me. Keeping track of their history "feels" like one of my duties.
Your boat is almost certainly a Penn Yan. Benson hit the nail on the head.
An interesting thing about boats is that they tend to stay close to where they were shipped..we don't know where your great great grandfather lived but that could provide another clue.
From my experience many Penn Yans have stayed fairly close to the Finger Lakes region....although I did buy one from Berwick Maine several years ago.
That boat will be a stunner if you restore it. An old vintage Sea-king could hang off the back.
 
So here is the serial number. I'll use the forums registry to see what I find. If you guys see something obvious, please let me know. Looks to read MC3-222 or MC8-222.
 

Attachments

  • Screen Shot 2019-10-10 at 8.38.43 PM.png
    Screen Shot 2019-10-10 at 8.38.43 PM.png
    1 MB · Views: 467
Here is the canoe in use, although I don't know where, along with a a little information about the man himself. We will get to the bottom of this yet!
Screen Shot 2019-10-10 at 8.48.14 PM.png
Screen Shot 2019-10-10 at 8.50.59 PM.png
Screen Shot 2019-10-10 at 8.50.59 PM.png
 
So... it's a Pen Yan Kingfisher. Great work guys. This makes sense based on the serial number, fact that square back canoes are really based around outboard power, and that the Pen Yan company was near where my great-great grandfather lived. Guess is 1922 based on your database. Thanks for the help! Now I've got to get her cleaned up. Which forum is best for maintenance and cleaning tips? Possible repairs?

https://www.wcha.org/content/penn-yan-boat-company
 
The Kingfisher model wasn't shown in the Penn Yan catalogs from the 1920s or early 1930s so it isn't likely to be from 1922. Their 1939 catalog is the oldest one that I have found to include this model. See page 36 of the catalog at https://adirondack.pastperfectonline.com/library/0847AFB8-E893-40F6-BA83-437677784400 for more details. There are no known serial number records available for Penn Yan so precise dating isn't easy. The search function here or the books at http://www.wcha.org/store/books may be your best sources for maintenance, cleaning, and repair tips. Have fun,

Benson
 
Last edited:
Where is the "change of heart"? This is a boat made for use with a motor.
If it was me, I'd put an elec trolling motor on it, but that's me.

Dan
Key point in Shari's note...vintage. I finally gave up on vintage motors for my cartopper and put a nice new Mercury on it. It starts on the first pull. It doesn't leave a plume of gas and oil on the water. The pull cord doesn't come off in my hand every other time I use it. The rewind spring doesn't need to be rewound every other time I use it. No varnished floats or mixing oil and gas.....I still have two old motors to hang on the back if I want to look "period"...but I've moved on to modern convenience and reliability. I don't need to carry tools in the boat anymore. I'm not against a motor on a boat made for one....I'm just not keen on torturing myself with an old relic anymore.. been there and done that. I look at the one in the photo and think, boy, that thing must have been interesting to keep running. A trolling motor would also be fine.
 
I go even farther, if I'm going fishing, I'll take my Lund w/25.
If I want to go fast, then the Starcraft w/85.
If I'm off to the BW, then a canoe, preferably light.
Casual day paddles, then the w/c.
 
I did this one a few years ago. New transom, canvas and satin varnish. Sorry I can't remember the year unless I dig out the paperwork. pete syak, kingfisher 010.JPG pete syak, kingfisher 011.JPG
 
Hey everyone. I'm going to be starting the restoration process on this boat shortly. Would it be best to start a new thread in the main forum or continue here?
 
Would it be best to start a new thread in the main forum or continue here?

I would suggest continuing here to keep everything together. This is a very small forum so people are likely to see your messages either way. Good luck with the restoration,

Benson
 
Well then, here's the boat as it sits now. It's been serving as some fantastic wall art for the past year, but it's time to start the party. I couldn't resist a peek at the planking, but I'd like to reserve judgment until the canvas is fully off.
 

Attachments

  • IMG_0121.jpg
    IMG_0121.jpg
    136.3 KB · Views: 268
Canvas mostly off. It could be worse. What do you guys think of the general condition? Saving hardware as we go for refinishing. Fully disassembling and stripping the boat is my goal over the next week or so.
 

Attachments

  • 63562524104__4213D108-99C0-4370-858D-073A682DA1FC.JPG
    63562524104__4213D108-99C0-4370-858D-073A682DA1FC.JPG
    210.4 KB · Views: 306
  • IMG_0129.JPG
    IMG_0129.JPG
    243.4 KB · Views: 291
  • IMG_0130.JPG
    IMG_0130.JPG
    182.3 KB · Views: 306
  • IMG_0131.JPG
    IMG_0131.JPG
    375.3 KB · Views: 299
  • IMG_0132.JPG
    IMG_0132.JPG
    306.9 KB · Views: 314
  • 63562524104__4213D108-99C0-4370-858D-073A682DA1FC.JPG
    63562524104__4213D108-99C0-4370-858D-073A682DA1FC.JPG
    210.4 KB · Views: 307
  • IMG_0129.JPG
    IMG_0129.JPG
    243.4 KB · Views: 288
  • IMG_0130.JPG
    IMG_0130.JPG
    182.3 KB · Views: 302
  • IMG_0131.JPG
    IMG_0131.JPG
    375.3 KB · Views: 284
  • IMG_0132.JPG
    IMG_0132.JPG
    306.9 KB · Views: 269
Stem seems to be pretty far gone. It floats over the ribs inside the boat and sandwiches together with the keel. Currently, only the tacks for the planks appear to be holding it in place, along with possibly some sealant or varnish.
 

Attachments

  • Screen Shot 2021-03-18 at 8.56.25 AM.png
    Screen Shot 2021-03-18 at 8.56.25 AM.png
    1.6 MB · Views: 233
Sam,
The stem actually looks pretty good. Typical of what I normally see when tearing down a row boat or canoe. Fill the holes and cracks with epoxy. I buy syringes to do that.
What we don’t see in the photo is what the stem looks like under the gunwale tips. That is usually where the rot hides. If there is rot there it is easy enough to saw back to good wood and scarf in a new piece.
 
Back
Top