Help support the WCHA Forums by making a tax-deductible donation!

Stem work

Discussion in 'Wood and Canvas' started by Chris Aman, Apr 19, 2021.

  1. Chris Aman

    Chris Aman New Member

    FB_IMG_1618758724217.jpg Hello, my name is Chris Aman. I am restoring a 1941 Old Town Yankee, (serial number 132694) that was given to me by my brother. I want to steam bend 2 replacement pieces out of quarter sawn ash for the stems. I also have some 100+ year old chestnut, but it looks like the original wood is ash. I have a steambox and a bending form, along with a piece of galvanized metal (a piece of roofing drip edge). The lengths of the pieces are about 16½". How long should the steamed pieces be so I may apply sufficient pressure, without breaking them. Should I just place the wood in the form with the drip edge positioned on the outside edge of the steamed ash? Second, if they're up to 1" thick, how long do they need to be steamed?
  2. Blott

    Blott LOVES Wooden Canoes

    Rob Stevens likes this.

Share This Page