Help support the WCHA Forums by making a tax-deductible donation!

Floatation

Discussion in 'Canoe Sailing' started by chris pearson, May 16, 2010.

  1. chris pearson

    chris pearson Michigan Canoe Nut

    Can anyone recommend floatation for my OT sailing canoe? It's a 16 foot Guide. There's alot of floatation out there but was wondering what would fit the bow and stern nice. How about a good bilge pump?
     
  2. Benson Gray

    Benson Gray Canoe History Enthusiast Staff Member

    Almost anything will work and the trick is to make sure that it is well secured and won't float out when you want it most. I've see people use old soda bottles with the tops on, beach balls, solid foam, old packing materials, and anything else that floats then secure them with nets or tarps. Most of the float bags for white water play boats or kayaks can simply be inflated until they conform to the space available. You will want to make sure that there is still enough space left for you to be comfortable in the middle.

    I have found that a large plastic milk jug with the screw top on and the bottom cut off makes a better bailer than a traditional bilge pump. The handle can be tied to the end of the main sheet so it is easy to find and will not get lost.

    Benson
     
  3. Robert P. Ross

    Robert P. Ross Ross Bros

    Chris,

    I have some bags I'll send you.


    www.RossBros.com

    Robert P. Ross
    Ross Bros.
    PO Box 60277
    Florence, MA 01062
    413.320.2306
     
  4. OP
    OP
    chris pearson

    chris pearson Michigan Canoe Nut

  5. Robert P. Ross

    Robert P. Ross Ross Bros

    Chris,

    I dropped them in the mail today. I hope you won't need them.

    Robert P. Ross
    Ross Bros.
    PO Box 60277
    Florence, MA 01062
    413.320.2306
     
  6. Robert P. Ross

    Robert P. Ross Ross Bros

    Reward For Twilite

    I have a friend searching for a boat his father built.

    See Text:Emmett Smith who is trying to locate a boat built by his father Everett. Emmett's email was originally sent to Tom Shephard, a fellow member of the Delaware River chapter of the TSCA. John thought I might be interested, and inevitably, I am. Here's the gist of the matter:

    "Dear Mr. Sheppard,

    My Name is Emmett Smith. John Brady gave me your name. I am looking for a very unique boat that I think may be in the Philadelphia area. It is a reproduction of a Rushton Vesper model decked sailing canoe that my father Everett Smith built for a customer in the 1970's. It was called 'Twilite,' and got a bit of press from WoodenBoat at the time. For me, it is a part of my family history, and I am anxious to find it.

    The boat was sold by the Ross Bros. in Massachusetts in the late 1980's and entered the world of designers and antiques. It found its way to Wanamakers Department Store at 1300 Market St. in Philadelphia, whee it was on display from 1991-1996. When Strawbridges bought out Wanamakers, the boat went into a storage unit at 8th and Market. In 2006, when FDC-Macy's moved into 1300 Market St., the old storage building was cleared out and the boat was sold. This is information from the Visual Director of Macy's, a man named Mark Moody, who oversaw the selloff but does not remember who the boat went to.

    So far this is where the trail ends. The boat was sold in downtown Philadelphia in 2006. So, I am contacting people in the area who would take note of a unique boat such as this. If you have seen it or have any leads for me please be in touch. I am looking also for anyone else who sells or deals in boats or maritime antiques; anyone who might have come across this boat.

    The boat is Alaskan cedar over oak, with mahogany decks and coamings and spruce masts. The folding rudder and Radix style centerboard are handmade as well. The boat has copper flotation tanks under the decks. It did have a flag with its name, but I do not know if it is still with the boat. The Ross Bros. also stamped their name before they sold it, probably under the thwarts and seats. I have attached a couple of pictures as well.

    Thank you so much for your time."


    I was intrigued. I searched my spotty WoodenBoat archive and found the article in WoodenBoat # 65, august 1985. Jogged my memory. As a recent graduate of the Pennsylvania Academy of Fine Art ('83)I was thrilled to read this article which depicted the boatbuilder as artist. It introduced me to sailing canoes, canoe yawls, and J H Rushton. I think I bought the Manley book on Rushton shortly thereafter and visited the Adirondack Museum within the year. I wrote Emmett to get permission to write about his search and some intriguing info came to light. Emmett is now a boatbuilder living on the West coast and also doing consulting work for various institutions. Everett now has his shop in Canton, NY, the location of Rushton's old boatworks. He served for a time as the curator of the Antique Boat Museum at Clayton, NY. Bob LaVertue, who commissioned the boat, I met at the MASCF last year. He crafts bronze and copper hardware for sailing canoes of this kind, including the folding fan centerboards in Springfield MA, and while he created some of the hardware for Twilite, the radix centerboard was made by John Wells.

    This boat has a rich heritage, and Emmett would like to return it to the family fold. ANYONE having any info regarding the whereabouts of this family heirloom should contact Emmett, or me or John Brady.

    Special thanks to Benjamin Mendlowitz for permission to use his lovely photos of Twilite. You really owe it to yourself to visit his website. And thanks to Tom Jackson at WoodenBoat for putting me in touch with him.

    http://www.facebook.com/home.php?filter=nf#!/notes/ross-bros/reward-for-twilite/122163667814309

    www.RossBros.com


    Robert P. Ross
    Ross Bros.
    PO Box 60277
    Florence, MA 01062
    413.320.2306
     

    Attached Files:

  7. Robert P. Ross

    Robert P. Ross Ross Bros

    Putting this back on the front burner.
     

Share This Page